how to fix stripped screw hole

How To Fix Stripped Screw Hole?

It is important to learn how to fix stripped screw hole by using the right tools. Stripped screw holes can be frustrating and annoying to repair. When you have a stripped screw hole, the screw won’t tighten to give you a secure hold. In today’s post, I will focus on how to fix a stripped screw hole. There are several options you can consider to solve this issue. Before you start, it is important to analyze the materials to decide which is the correct method to fix stripped screw holes. Without wasting much time, let us now find out how to fix stripped screw hole in more detail.

How To Fix Stripped Screw Hole?

Using the following methods, you can easily learn how to fix stripped screw hole.

  1. By Using Toothpicks
  2. By Using Plastic Wall Plugs
  3. By Using Wood Strips
  4. By Using A Large Screw
  5. By Using Automotive Filler

The easiest way to deal with a stripped screw hole is by using either toothpicks or plastic wall plugs. You must consider the type of material before you approach fixing a stripped hole. Keep on reading further to know how to fix stripped screw hole on different surfaces.

Fix Stripped Screw Hole By Using Toothpicks

Wooden toothpicks can easily fix stripped screw holes on wooden surfaces. Follow these steps to know how to fix stripped screw hole in the wood cabinet or door frame.

  1. First, insert two to three toothpicks into the stripped screw hole.
  2. Pour 2 to 3 drops of wood glue on the end of the toothpicks.
  3. Gently spread the glue with your fingers or a cotton swab to fully cover the toothpicks.
  4. Now, lightly tap on the ends of the toothpicks with a hammer.
  5. This will help you to push the toothpicks as deep as they can go into the hole.
  6. You can cut off the exposed ends of the toothpicks or break them using a hammer.
  7. Leave the glue to dry for at least an hour or more as required.
  8. After a while, re-enter the screw back into the hole.
  9. Turn the screw with a screwdriver or drill to screw it back into the hole.

Thus, toothpicks will create resistance so that the screw’s threats can stay securely in the hole. Make sure the toothpicks should fit securely in the hole.

Fix Stripped Screw Hole By Using Plastic Wall Plugs

If you are unable to find toothpicks, plastic wall plugs are one of the best alternatives! Follow these steps to know how to fix stripped screw hole in the concrete.

  1. First, purchase wall plugs matching the screw size from a hardware store.
  2. Insert the plug into the hole and tap on the top with a hammer till it fits into the hole.
  3. Now, re-insert the screw into the wall plug.
  4. Turn the screw with a screwdriver or drill to screw it back into the hole.

If you are unable to find plugs similar to the size of the hole, you can drill them so that they can fit.

Fix Stripped Screw Hole By Using Wood Strips

Surprisingly, you can also use wood strips to fix the stripped hole in wood. Follow these steps if you want to learn how to fix stripped wood screw hole on a door hinge.

  1. You first have to get wood strips of the same type of wood material.
  2. Fill the stripped hole with wood strips until it’s full.
  3. Now, apply wood glue to the wood strips.
  4. Leave it for a few hours to dry completely.
  5. You can trim off excess wood strips if required.
  6. Now, re-insert the screw into the hole.
  7. Turn the screw with a screwdriver or drill to screw it back into the hole.

I recommend you use wood strips from the same wood material you are treating. However, using wood strips from different types of wood might damage the stripped hole even more.

Let us now find out how to fix stripped screw hole in the metal door.

Fix Stripped Screw Hole By Using A Large Screw

Using a bigger screw can also fix a stripped screw hole. Follow these steps to know how to fix stripped screw hole in metal.

  1. Replace the old screw with a bigger screw.
  2. Now, check the threads of the new screw to have a stronger grip on your stripped hole.
  3. Then, place the new screw back into the hole.
  4. Turn the screw with a screwdriver or drill to screw it back into the hole.

While using this method, the size of the screws makes all the difference. Make sure the screw doesn’t split the wood when you put it into the hole.

You can keep on reading to know how to fix a stripped screw hole in the plastic.

Fix Stripped Screw Hole By Using Automotive Filler

When all the DIY methods fail to give results, you can repair the stripped screw hole with automotive filler. Follow these steps to know how to fix stripped screw hole with a screw hole filler.

  1. First, make the hole a bit larger by drilling the hole.
  2. Purchase automotive filler and read the packaging before using it.
  3. Now, mix the components together using a putty knife.
  4. Mix them well to activate the ingredients in the filler.
  5. Then, fill the stripped screw hole completely with the filler.
  6. Flatten out the top with the putty knife.
  7. Now, spray lubricant like WD-40 to saturate the threads on the screw.
  8. Slowly insert the screw into the hole.
  9. Press down the top of the screw by applying little pressure.
  10. If the filler spills out from the sides, push it back into the hole.
  11. The screw will leave the imprints of its threads as it dries.
  12. Allow the filler to dry for five minutes and then remove the screw.
  13. Let the filler dry overnight to harden it.
  14. Once the filler dries out, re-insert the screw into the hole.
  15. Turn the screw with a screwdriver or drill to screw it back into the hole.

 Thus, you can now secure the screw back into the new hole that you’ve created.

Know more information like this on Fixznow

FAQ

Can You Repair A Stripped Screw?

If you have a stripped-out screw hole and can’t use a larger screw, simply apply some wood glue to a few toothpicks and shove them into the hole. Once the glue dries, cut off the protruding ends of the toothpicks and drive the screw. Just be careful not to overtighten the screws or you’ll strip the hole again.

How Do You Fix A Screw That Won’t Tighten?

One time-honored remedy is to remove the loose screw, spread some wood glue on two or three flat toothpicks and force the toothpicks into the hole. Let the glue dry, then cut the toothpicks off flush with the surface of the hinge recess. Put the screw back in and tighten it. It should grip firmly.

Can You Fix Stripped Metal Screw Hole?

In order to fix a stripped hole in a metal door, use one of the following methods: Use a specialized bit to enlarge and thread the hole, then insert a new screw. Drive a larger-diameter, self-tapping screw into the hole. Fill the hole with metal epoxy, then drive the original screw back into the hole.

Can You Use Gorilla Glue On Screws?

Polyurethane based glues (like Gorilla Glue) and cyanoacrylate based adhesives (like Gorilla Super Glue) will both work on metals, as will epoxies and contact adhesive; which glue is best depends on a few other considerations.

Conclusion

In the above post, I’ve explained how to fix stripped screw hole in detail. The process of fixing stripped screw holes is very easy if you know which method is correct for your problem. Toothpicks and plastic wall plugs can be used for a quick fix. You can also use a larger screw to fix a stripped screw hole. Just make sure you don’t apply too much force as this might split the wood. You can consider any of these above methods to save yourself some money! Once you learn how to fix stripped screw hole, you can make this repair job a lot easier.